Fast Curing Removable Two-Component Polyurethane High Thermal Conductivity Structural Adhesive
Product Description
FEATURES
1. Fast curing and rapid initial strength;
2. Low density, high strength and high toughness;
3. It has good thixotropy and little wear to glue equipment, and can be applied with glue dispenser or glue gun.
4. Thermal conductivity 0.3--2W/m.k, low thermal resistance and high thermal conductivity efficiency;
MOQ:500 Pieces
PACKAGING
Double tube packaging: 400ml/tube; 12 tubes/carton
Bucket: 5 gallon/bucket
Drum: 55 gallon/drum.
Typical Properties
|
Property
|
STANDARD/UNITS
|
VALUE
|
|
|
Component
|
--
|
Part A
|
Part B
|
|
Appearance
|
Visual
|
Black
|
Beige
|
|
The color after mixing
|
--
|
Black
|
|
|
Viscosity
|
mPa.s
|
40000±10000
|
20000±10000
|
|
Density
|
g/cm^3
|
1.2±0.05
|
1.2±0.05
|
|
Data details after mixing
|
|||
|
Mixture ratio
|
Mass ratio
|
AB=100:100
|
|
|
After Mixing density
|
g/cm^3
|
1.25±0.05
|
|
|
Operation time
|
Min
|
8-12
|
|
|
Time of initial setting
|
Min
|
15-20
|
|
|
Initial curing time
|
Min
|
30-40
|
|
|
Hardness
|
Shore D
|
50
|
|
|
Elongation at break
|
%
|
≥60
|
|
|
Tensile strength
|
MPa
|
≥10
|
|
|
Shear strength ( AI-AI)
|
MPa
|
≥10
|
|
|
Shear strength (PET-PET)
|
MPa
|
≥5
|
|
|
Thermal conductivity
|
W/m.k
|
0.3--2
|
|
|
Volume resistivity
|
Ω.cm
|
≥10 14
|
|
|
Dielectric strength
|
kV/mm
|
26
|
|
|
Application temperature
|
℃
|
-40-125（-40-257℉）
|
|
|
The above data are tested in the standard state.
|
|||
Typical Applications
1. The bonding between new energy battery module cells and bottom cases, cells and cells;
2. Bonding of vehicle body composite parts, such as SMC, BMC, RTM, FRP, etc. and metal materials;
3. Self-adhesion and mutual adhesion of metal, ceramics, glass, FRP, plastic, stone, wood and other base materials.
Bonding the external liquid cooling plate
Bonding of soft-packed cells and battery modules
Bonding cells and battery liquid cooling plate
Direction of Applications
Pre-Treatment
The adhesion surfaces must be clean, dry, oil and grease free.
∎Application
1. Double-tube 2 * 300ml packaging which contains a static mixer. The first 8 cm to
10cm of the adhesive pass should be rejected, owing to the fact they may not have been mixed correctly.
2. 5-gallon bucket packaging can work with auto gluing equipment. If you need an auto gluing supply system, you can contact SIWAY to provide technical support and solutions.
∎ Packaging
Double tube packaging: 400ml/tube; 12 tubes/carton
Bucket: 5 gallon/bucket
Drum: 55 gallon/drum.
∎ Shelf Life
Shelf life: 6 months in unopened packaging in a cool and dry storage place at
temperatures between +8℃ to + 28℃
∎ Cautions
1.Unused products should be immediately sealed and stored to prevent moisture
absorption；
2.Keep away from children;
3 It is recommended to be used in a well-ventilated place;
4.In case of contact with eyes and skins, rinse with plenty of water first, and seek medical advice immediately if necessary.
5.Please refer to MSDS for safety information about the product.
∎ Special Instructions
The data in this data sheet were obtained under laboratory conditions. Due to the
differences in conditions of usage, it is the responsibility of the user to test and validate this product under their own conditions of use. SIWAY does not guarantee questions appearing in the process of the sale of SIWAY technology products and the use of Siway under specific conditions. We do not assume responsibility for direct, indirect or accidental losses arising from problems with scientific and technological products. If haveany problems in the process of use, you can contact with our Technology Service Department, and we will provide you with all services.
Contact Us
Shanghai Siway Curtain Material Co.Ltd
No.1 Puhui Road ,Songjiang Dist,Shanghai,CHINA Tel: +86 21 37682288
Fax:+86 21 37682288
Write your message here and send it to us
