Polyurethane
-
SV312 Polyurethane Sealant for Windshield & Glass Bonding–2 Hour Drive-Away
SV312 is a one-component polyurethane adhesive sealant for bonding automotive windshields and side glass. It cures to 61 Shore A with 4.0 MPa tensile strength and ≥350% elongation, extrudes at 80 g/min, and allows a safe drive-away time of two hours on airbag-equipped vehicles. It is supplied in 300 ml cartridges and 600 ml sausages.
Formulated for the automotive aftermarket and glass-replacement trade, SV312 reacts with atmospheric moisture to form a tough, permanently elastic bond between glass and painted body flanges. It is non-sagging, non-corrosive to paint and antenna grids, requires no primer on glass, and delivers consistent gunability from 5 °C to 35 °C. Available in black as standard, with white, transparent and custom colors on request, and with full OEM private-label support.
-
SV313 20KG Expansion Joint Self Leveling Polyurethane Sealant for Concrete Joints
SV313 is a one-component, moisture-curing, self-leveling polyurethane sealant engineered for horizontal expansion joints in rigid pavements — airport runways and aprons, concrete highways, bridges, warehouse floors and industrial traffic areas. It flows into the joint under its own weight and cures into a low-modulus elastomer with ≥800% elongation at break and Shore A hardness ≥15, allowing it to absorb cyclic thermal movement without tearing, cracking or debonding. Service range is -40 °C to +80 °C; no primer is required on clean, dry concrete, and no tooling is needed after pouring. Additionally, SV313 exhibits excellent resistance to UV radiation, moisture, and chemical exposure, ensuring longevity and reliability in demanding environments.Available in 20 kg drums, 600 ml sausages and 300 ml cartridges, with grey, black and white as standard colors.
-
SV-8000 Two Component PU Polyurethane Sealant for Insulating Glass
SV-8000 two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.
-
SV 315 Polyurethane Bonding Urethane Adhesive Sealant For Wood Floor
SV315 is a one-component, durable and flexible interior polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture. -
SV-312 One- component Polyurethane Windshield Glass Sealant Adhesive
SV312-A environmentally friendly polyurethane glass bonding sealant is a one-component moisture-curing polyurethane bonding adhesive with low VOC Volatile, good sealing performance and cohesion, no damage to the adhered substrate Corrosion-free, no pollution to the environment, with metal, Good adhesion to various substrates such as glass.
-
SV110 Single Component Polyurethane Waterproof Coating for Outdoor and Indoor
SV110 is one component polyurethane waterproof material with excellent elasticity. Mainly used for outdoor roofing and indoor waterproofing of the basement layer. The surface needs to add a protective layer, such as floor tiles, cement water slurry, etc.
-
SV 811FC Polyurethane Architecture Universal PU Joint Adhesive Sealant
SV 811FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane sealant.
-
SV Corner Angle Frame Polyurethane Assembly Sealant Adhesive for Aluminum Window Door Corner Angle Joint
SV PU Corner Angle Assembly Adhesive is a solvent-free, gap-filling and multipurpose one-part polyurethane assembly adhesive with quick reaction time and viscous elastic adhesive joint. It is a single-component polyurethane polymer product specially developed to solve the corner cracking of doors, windows and curtain walls. It is widely used in broken bridge aluminum alloy doors and windows, curtain walls, fiberglass doors and windows, aluminum-wood composite doors and windows, and other Structural strengthening and sealing of the corners of the window frames where corner codes are connected.
-
Fast Curing Removable Two-Component Polyurethane High Thermal Conductivity Structural Adhesive
SV282 is a solvent-free, environmentally friendly, high-strength, two-component polyurethane structural adhesive with thermal conductivity, it has excellent adhesion andaging resistance.Two component Polyurethane Thermally Conductive Structural Adhesive series is room temperature fast curing structural adhesive. It has high strength and fast curing speed. Used for New Energy Vehicle and Energy storage system, it could bond with Aluminum, ABS, Plastic, steel and blum film -
SV High Performance Assembly Adhesive
SV High Performance Assembly Adhesive is especially suitable for bonding in closed occasions because it has a curing agent. Injection system suitable for corner connection of aluminum doors and windows. It has very high hardness, certain toughness and good joint filling ability.
-
Wholesale SV313 Self-leveling PU Elastic Joint Sealant
SV313 Self-leveling PU Elastic Joint Sealant is a single component, self-leveling, easy to use, suitable for minor slope 800+ elongation, super-bonding without crack polyurethane material.
-
SV Flex 811FC Architecture Universal PU Adhesive Sealant
SV Flex 811FC Polyurethane sealants are used to seal joints in a wide variety of construction applications. SV Flex 811FC is professional-grade polyurethane sealants that have outstanding adhesion compatibility, elasticity, durability, paintability and much more. SV Flex 811FC polyurethane sealants are able to bond to most surfaces, particularly porous substrates such as concrete and masonry. These sealants have a very high bond strength and are ideal in demanding applications.