page_banner

products

SV 785 Mildew Resistant Acetoxy Sanitary Silicone Sealant

Short Description:

SV785 Acetoxy Sanitary Silicone Sealant is a one-component, moisture curing acetoxy silicone sealant with fungicide. It cures fast to form a durable and flexible rubber seal resistant to water, mildew and mold. It can be used for high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and lavatories.


Product Detail

Product Tags

Product Description

FEATURE

1. 100% silicone

2. Easy to apply in convenient cartridge form

3. Excellent elasticity

4. Low VOC

5. Fast curing

6. 0 class anti-mildew

COLOURS
SIWAY® 785 is available in clear, black, gray, white and other customized colours.

PACKAGING
200L in Drum

BASIC USES

SV785 Acetoxy Sanitary Sealant is an excellent candidate to consider the reliable prevention of mildew formation around fixtures in high humidity and temperature areas such as bath and kitchen rooms, swimming pool, facilities and      lavatories. It also has good adhesion to most common building materials e.g. glass,   tiles, ceramics and fiber glass, painted wood.

TYPICAL PROPERTIES

These values are not intended for use in preparing specifications

Item Test result Test method
Appearance No grain, noagglomerations ISO 11600
Density, g/cm3 1.00±0.05 ISO 1183
Resistance to flow, mm 0 GB/T 13477.6-2003
Tack free time, min 10-20 GB/T 13477.5-2003
Curing rate, mm/24h 3.0-4.0  
Extrudability, ml/min ≥300 ISO 8394
Ultimate elongation, % ≥300 GB/T 528- 1998
Ultimate tensile strength, MPa ≥ 1.2 GB/T 528- 1998
Mildew Proofing Grade Level 0 GB/T1741-2007
Application temperature, ℃ 5-35  
Service temperature range ( after cure) , ℃ (-40)- 120  

STORAGE AND SHELF LIFE

SV785 should be stored at or below 27℃ in original unopened containers. It has a shelf life of 12 months from the date of manufacture.

HOW TO USE

Surface Preparation

Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

Application Method

Mask areas adjacent to joints to ensure neat sealant lines. Apply SV785 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the joint surfaces. Remove masking tape as soon as the bead is tooled.

TECHNICAL SERVICES

Complete technical information and literature, adhesion testing, and compatibility testing are available from SIWAY.

 


  • Previous:
  • Next:

  • Write your message here and send it to us