SV 903 Silicone Nail Free Adhesive

Short Description:

SV903 Silicone Nail Free Adhesive is a non-solvent adhesive designed for replacing nails. It has high bonding strength, extensive bonding data, and environmental protection, and is especially suitable for wood, ceramic tile, stone, concrete, etc.The fixed connection between materials such as metal and plastic replaces nailing and drilling, has no damage to the wall surface, no noise and dust pollution in the application process, and brings you a new construction concept and beautiful effect.

Colors: White,black,grey

Package: Available in 300ml cartridge (24PCS/CTN)

Send email to us

Product Detail

Product Tags

Product Description

FEATURES
1.Fast curing,good adhesion
2.Excellent high and low temperature resistance
3.Clear color, customized color

COLOURS
SIWAY® 903 is available in black, gray, white and other customized colours.

PACKAGING
300ml plastic cartridges

TYPICAL PROPERTIES

These values are not intended for use in preparing specifications

Test standard	Test project	Unit	value
GB13477	Flow,sagging or vertical flow	mm	0
GB13477	surface drying time(25°C,50%R.H.)	min	30
GB13477	Operating time	min	20
	Curing time (25°C,50%R.H.)	Day	7-14
GB13477	Durometer Hardness	Shore A	28
GB13477	The ultimate tensile strength	Mpa	0.7
	Temperature stability	°C	-50~+150
GB13477	Movement capability	%	12.5

CURE TIME

As exposed to air, SV903 begins to cure inward from surface. Its tack free time is about 50 minutes; the full and optimal adhesion depends on the sealant depth.

SPECIFICATIONS

BM668 is designed to meet or even exceed the requirements of:

Chinese national specification GB/T 14683-2003 20HM

STORAGE AND SHELF LIFE

SV903 Silicone Nail Free Adhesive should be stored at or below 27℃ in original unopened containers. It has a shelf life of 18 months.

HOW TO USE

Surface Preparation

Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

Application Method

Mask areas adjacent to joints to ensure neat sealant lines. Apply BM668 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the joint surfaces. Remove masking tape as soon as the bead is tooled.

TECHNICAL SERVICES

Complete technical information and literature, adhesion testing, and compatibility testing are available from SIWAY.

BASIC USES
Ideal for direct bonding of various heavy construction materials. It may be used without primer, to bond bathroom accessories, panel, skirting board, windowsills, stripes, thresholds, mirrors and isolating materials. It is also widely used in coach work and metal connecting joint in shipbuilding industry.